Probleme și soluții comune pentru Keensert

În timpul utilizării Keensert, Pot fi întâmpinate unele probleme comune. Descoperirea și rezolvarea în timp util a acestor probleme pot evita în mod eficient defecțiunile echipamentelor și întreruperile producției.

1. Fire libere:
Cauză: Loose threads may be caused by vibration, impact or loose latch keys.
Solution: First check whether the latch key is loose. If it is loose, re-tighten the latch key. If the latch key is normal, it may be caused by thread wear. You can consider replacing the Keensert.

2. Lock key falls off:
Cauză: The latch key may fall off due to improper installation or long-term use.
Solution: Reinstall the latch key to ensure that the latch key fully enters the keyway and is firmly pressed. If the latch key is damaged, a new latch key should be replaced in time.

3. Thread damage:
Cauză: Thread damage may be caused by excessive torque during installation, insufficient thread processing accuracy or long-term use.
Solution: Minor thread damage can be repaired with a repair tool. If the damage is severe, a new latch screw sleeve should be replaced.

4. Corrosion problem:
Cauză: Corrosion may be caused by the presence of a humid environment or corrosive media in the bolt sleeve.
Solution: For environments prone to corrosion, choose materials with better corrosion resistance, such as stainless steel or bronze. At the same time, regularly clean the corrosion products and apply anti-corrosion coating