Nantu à noi Cuntatta ci |

U più grande esportatore di inserti di filu Produttore Chine dapoi 2004

CommonproblemsandsolutionsforKeensert

Cunniscenza

Prublemi cumuni è suluzioni per Keessert

Durante l'usu di Keessert, Alcuni prublemi cumuni ponu esse incontrati. Basta a scuperta è a risoluzione di sti prublemi per evità effittivamenti fallimenti di l'equipaggiu è interruzzioni di produzzione.

1. Fili chjusi:
Caducà: Loose threads may be caused by vibration, impact or loose latch keys.
Solution: First check whether the latch key is loose. If it is loose, re-tighten the latch key. If the latch key is normal, it may be caused by thread wear. You can consider replacing the Keensert.

2. Lock key falls off:
Caducà: The latch key may fall off due to improper installation or long-term use.
Solution: Reinstall the latch key to ensure that the latch key fully enters the keyway and is firmly pressed. If the latch key is damaged, a new latch key should be replaced in time.

3. Thread damage:
Caducà: Thread damage may be caused by excessive torque during installation, insufficient thread processing accuracy or long-term use.
Solution: Minor thread damage can be repaired with a repair tool. If the damage is severe, a new latch screw sleeve should be replaced.

4. Corrosion problem:
Caducà: Corrosion may be caused by the presence of a humid environment or corrosive media in the bolt sleeve.
Solution: For environments prone to corrosion, choose materials with better corrosion resistance, such as stainless steel or bronze. At the same time, regularly clean the corrosion products and apply anti-corrosion coating

Prev:

Dopu:

Lascia una Risposta

8 + 2 =

Lascia un missaghju

    31 − = 23